Dongguan Sun Young Resource Limited-Dongguan Sheng Yang Industrial Co., LTD

Home > Product > Off Grid Inverter > Solar Controller
Filter Products

SY-PWM-60A

60A Solar Controller Charge Regulator 12V 24V Auto Switch PWM Model Solar Panel Battery Charge Controller Free Shipping
  1. Detailed information
  2. Detail display
  3. Warranty

LCD Display PWM Solar controller 12V/24V 60A for solar system

 
3 charge modes to choose:
1.Charge Only
2.Light Control
3.Light and 15hours timer control(Settable)
 
Package Included:
1. 1X solar controller
2. 1X Users` Manual
3. 1X Temp. Sensor
 
60A Solar Panel Charge Controller Regulator 12V/24V
Compatible with 1440W(24v) solar panel with dark activated function,Max current is 60A
Features:
Solar LCD series a kind of intelligent,
multipurpose solar charge and discharge controller
1, LCD screen display
2, Easy operation interface
3, PWM charging mode
4, Parameter user can reset,
5, A key to open and close the load,
6, A key to restore the factory settings,
7, Battery reverse discharge protection,
8, Battery reverse polarity protection
9, Battery under voltage protection,
10, Overload, short-circuit protection,
11, Automatic temperature compensation function,
12, USB 5V charging (for 500mA) for mobile phone.
 
Installation
1. Ready tools and cables. Encourage you to matching the right cables. Ensure that the current density<4mm2 that is conductive to reducing the line voltage drop. Recommended: 60A with 20mm2 cable. Check weather the installation sitescompliance with the relevant safety requirements. Please avoid the damp, dusty, there is a place flammable, explosive and corrosive gases use the controller to install.
2. Install the controller into a fixed vertical plane. See section 5 of the pore size and pore spacing. In order to ensure a good thermal control conditions, please set aside each 10cm below the controller space.
3. As shown on the right, connect the (1) Load, (2) Battery and (3) Solar Panel to the controller according to the order of (1) (2) (3). Pay attention to the load, battery, solar panel and controller of same polarity.
4. Put into the external temperature sensor on the left of the controller (probe port). The temperature sensor should be similar space with battery. (Otherwise, the controller will control the parameters of all wrong temperature compensation.)
5.If you have remote monitoring and control function, please insert one end of the included communication wire on the right of the controller (communication port), the other end to connect to The host computer.
Demolition: To prevent accidents, please order the demolition of solar panels, battery and load disconnect with controller.
Note:Battery polarity will not damage the controller, but you will have a load equipment security risk

Warranty Conditions
Warranty Period: 15-year limited warranty period.
Warranty Evidence: The B/L,Tracking no, and a completed warranty card.
We grant an implied warranty of 1 year to the inverter from date of purchase for repair or replace the Defective Product free of charge includes freight cost. 

Furthermore, we provides an additional limited warranty for 14 years for repair or replace the Defective Product free of charge but non-free of freight charge. If your device has a defect or malfunction during the warranty period, please also contact our customer service staff or your retailer or installer. 
Warranty claims are excluded for: 
• Alterations or repairs to the unit without prior authorization 
• Improper use or operation of device
• Improper and non-standard installation 
• operating the equipment with defective safety devices 
• Impact of foreign objects and force majeure (lightning, surge, storm, fire) 
• Inadequate or nonexistent ventilation of the device
• disregarding of safety regulations 
• shipping damage 
• The Product has been improperly stored or was damaged while in possession of the Dealer or end user; 

NEWS